Hai Feng Ji, Drexel University, United States
I will present a summary of some optoelectronic applications of red and black phosphorus nanomaterials. The synthesis, characterization, stability improvement of the materials will also be discussed.
I will present a summary of some optoelectronic applications of red and black phosphorus nanomaterials. The synthesis, characterization, stability improvement of the materials will also be discussed.
The logistic mathematical approach has been successfully employed to describe an impressive amount of data relating the tumor volume (V) versus time (t). Shortly, the logistic model accounts for the balance between positive Malthusian-like fractional growth rate and terms describ [....] » Read More
Vacancy-mediated chemical ordering phenomena were studied by means of Monte Carlo (MC) simulations in nanostructured B2-ordering NiAl and L10-ordering FePt. The (100)-oriented NiAl films were modeled with an Ising-type Hamiltonian with pair-interaction energy parameters yielding [....] » Read More
The talk will discuss the challenges in developing corrosion resistant graphene coating on most common engineering alloys, such as mild steel, and present recent results demonstrating circumvention of these challenges. In spite of traditional approaches of corrosion mitigation (e [....] » Read More
Background: Ibrutinib (IBR) has been accepted as a selective tyrosine kinase inhibitor to be used in the treatment of chronic lymphocytic leukemia (CLL). However, it has low oral bioavailability (2.9 %) which may attributed to low solubility (0.002 mg/ml, BCS class II) and first- [....] » Read More
Introduction: There has been improvement in the quality of life of people living with HIV-1 since the advent of HAART. Nevertheless, the report on several adverse effects such as insulin resistance, type 2 diabetes mellitus (T2DM), and reproductive dysfunctions (RDs) are on incre [....] » Read More
As a result of the significant increase in greenhouse gas emissions, technologies for the capture, utilization and storage of carbon dioxide are being implemented. Carbon dioxide (CO2) methanation has attracted considerable interest among potential carbon utilization strategies d [....] » Read More
This study investigated the photocatalytic and antibacterial activities of plant-mediated silver nanoparticles (AgNPs) from a medicinal plant extract of Khaya senegalensis (K. senegalensis) and oxygen-functionalized carbon nanotubes (oCNTs), respectively. The CNTs were func [....] » Read More
In order to eliminate cancer cells, hyperthermia is a therapeutic technique that involves raising body temperature to a range of 42–46 °C. The use of magnetic nanoparticles in the magnetic fluid hyperthermia method has attracted significant interest in cancer clinics am [....] » Read More
Addressing metal deficiencies in synthetic hydroxyapatite (Hap) is proposed as a way to enhance Hap's mechanical properties. Previous studies suggest that incorporating metals or metal oxides improves fracture toughness and reduces brittleness. This study investigates th [....] » Read More
The Lorentz transformation (LT) makes three predictions which are not consistent with one another: Lorentz-FitzGerald length contraction (FLC), time dilation (TD) and light-speed equality for observers in relative motion to one another. The LT also stands in violation of the Law [....] » Read More
Nowadays, nanofluids are involved in thermal energy systems as heat transfer fluids. Wetting properties and contact angle measurements play a crucial role in evaporation processes and are closely related to pumping power and corrosion problems.In this paper, the effect of nanopar [....] » Read More
The functionalization of nanomaterial surfaces has led to a break through advancement in nanotechnology, especially in the pharmaceutical and biomedical sciences. The clinical results showed that adding specific chemical species to nanoparticles changed them into multifunctional [....] » Read More
Hydrogen (H2) is gaining public attention as one of the candidates for the next-generation of energy. Environmentally friendly H2 is expected to make a major contribution to sustainable societies. However, the detection of H2 gas is important in nuclear power stations, coal [....] » Read More
Electrochemical Energy Storage Devices such as Supercapacitors (SCs) are efficient technologies to tackle the ongoing energy crisis due to high power density, rapid charge-discharge kinetics, and prolonged life span. Despite numerous advantages, researchers are actively engaged i [....] » Read More
Multiple sclerosis (MS) is a serious neurological problem because of its high prevalence, chronic course, frequent disability, and propensity to affect young people. The immunopathogenesis hypothesis underlies the origin of MS. Selective sorption activity of biocompatible magneti [....] » Read More
In recent decades, growing population and industrial development have led to the release of huge amounts of highly toxic chemical pollutants into the environment, globally. Nanoadsorbents and nanophotocatalysts have been applied to remove diverse pollutants from water. Different [....] » Read More
In this presentation, I will comprehensively and deeply explore the optimization of hybrid adhesive-bolted joints with graded bonding regions. The main objective of this talk is to introduce the concepts, methods, and key results related to enhancing structural performance throug [....] » Read More
CNTs have superior properties such as high tensile strengths, high aspect ratio, high stiffness and low density and however, can be used as the reinforce phase for the composite materials. In this paper, dynamic buckling of the smart subjected to blast load subjected to electric [....] » Read More
Fluorescent carbon dots (C-dots) have been increasingly development with a wide range of bioapplications. The use of green synthesis, using raw materials such as seeds, flowers, and other carbon sources, has increased. These C-dots have potential in several bioapplications due to [....] » Read More
Three-layer particleboards are essential components in the building industry, used in furniture, cabinetry, and flooring. However, stakeholder demand and prices for wood-based materials are increasing rapidly, while climate change is affecting our planet. This review takes a crit [....] » Read More
This work investigates the impact of inorganic nanofillers on the optical properties of polymeric nanocomposite films intended for application in optoelectronic devices. X-ray diffraction, Fourier transform infrared spectroscopy, and scanning electron microscopy are employed to a [....] » Read More
Will be Updated Soon...
There have been no potential clinically translatable developments of intravenous CT contrast materials over decades and iodinated contrast agents (ICA) remain the only FDA-approved media for CT. Small molecule ICA used to highlight vascular anatomy have weak CT signal in large-to [....] » Read More
This article explores the transformative potential of nanotechnology and memory metals in enhancing the design and operation of nuclear reactors, encompassing both fission and fusion technologies. Nanotechnology, with its ability to engineer materials at the atomic scale, offers [....] » Read More
Photoalignment and photopatterning has been proposed and studied for a long time. Light is responsible for the delivery of energy as well as phase and polarization information to materials systems. It was shown that photoalignment liquid crystals by azodye nanolayers could provid [....] » Read More
Multiple sclerosis (MS) is a serious neurological problem because of its high prevalence, chronic course, frequent disability, and propensity to affect young people. The immunopathogenesis hypothesis underlies the origin of MS. Selective sorption activity of biocompatible magneti [....] » Read More
Heteropolyacids have created increasing research interest due to their outstanding properties,This idea make us to synthesize a novel nanocatalyst was via HPA immobilization of magnetic graphene oxide - cyanoguanidine composite. The catalytic performance created was employed [....] » Read More
The endocrine-disrupting compounds (EDCs) are exogenous substances able to alter the structure or function(s) of the endocrine system and cause adverse effects on several organisms, their progeny, populations, or subpopulations. There are few reports in the literature about the m [....] » Read More
Important Alert:
X
Title : Making a nano bandaId™: The merging of nanotechnology and artificial intelligence (AI) for improved medicin
Thomas J Webster, Hebei University of Technology, United States
Artificial Intelligence (AI) has already revolutionized numerous industries. Nanotechnology, or more specifically nanomedicine, has already generated hundreds of products aiding in human health today. This invited presentation will provide a review of how AI is being used with na [....] » Read More
Title : Artificial Intelligence (AI) in biomedical engineering
Hossein Hosseinkhani, Innovation Center for Advanced Technology, Matrix, Inc., United States
Application of Artificial intelligence (AI) in biomedical engineering technology is rapidly under development. The way AI applies in biomedical science is as the same as natural living cells consider playing the critical rules in their extracellular matrix environment. The presen [....] » Read More
Title : Synergetic effects of plasmonic Ag nanoparticles and plasmonic WS2 nano disc hybrid underneath graphene layer for enhanced photodetector
Mohammed Alamri, Umm Al-Qura University, Saudi Arabia
Two-dimensional (2D) materials van der Waals (vdW) heterostructures, such as stacking Transition Metal Dichalcogenides (TMDs) on graphene, have improved the performance of optoelectronics devices. Also, plasmonic metal nanostructures enhance the light absorption in 2D materials a [....] » Read More
Title : Thin film nanocomposite membranes: Evaluation of performance for the treatment of textile wastewater
Amr Tayel, The American University in Cairo, Egypt
The use of thin-film nanocomposite membranes in the partitioning of dye/salt mixtures holds significant importance for the treatment and subsequent reuse of textile industry wastewater. The objective of this work is to investigate the effects of membrane properties on the removal [....] » Read More
Title : Development of multifunctional catalyst for removal of persistence compounds
Ishita Kaushal Bhatt, Dharmsinh Desai University, India
Optical property of ZnO enhanced through Fe-doped ZnO nanoparticles synthesis through precipitation method using Zinc acetate dihydrate as a precursor and Oxalic acid as a bridging agent dissolved in alcohol. For optimum enhancement of catalyst, reflux method add-on with precipit [....] » Read More
Title : Novel development of zinc oxide coated zarbon nanoparticles from pineapples leaves using sol gel method for optimal adsorption of Cu 2+ and reuse in latent fingerprint
Bienvenu Gael Fouda Mbanga, Nelson Mandela University, South Africa
This study underlined a latest approach of preparing Nitrogen carbon nanoparticles fused on zinc oxide nanoparticle nanocomposite (N-CNPs/ZnONPs nanocomposite) for the uptake of copper ions (Cu2+) from wastewater using a sol gel method and apply the metal loaded adsorbent in late [....] » Read More
Title : Deploying nanotech for sustainable energy transition in Nigeria
Samuel Chisa Dike, Rivers State University, Nigeria
Nanotech is a buzz word for modern technological advancement and breakthroughs globally.This is due to its application and adoption in sectors where conventional technology could not achieve much progress. Such sectors include but not limited to Energy, Environm [....] » Read More
Title : Formation and detailed internal structure of four-way symmetrically translated decagonal tiles
Chung Yuan Kung, National Chung Hsing University, Taiwan
Four-way symmetric 2-D translational unit tiles is constructed and converted into a two-dimensional atomic site pattern, which includes multiple pentagonal clusters, circular clusters, and three types of face-centered clusters. They are arrayed orderly in the unit cell with diffe [....] » Read More
Title : Study of preparation methods and industrial applications nano oleophobic coating
Seyed Mohammad Pouresmaeily, Malek-e-Ashtar University of Technology, Iran (Islamic Republic of)
Surface of accessories around us at risk of infection of contacts or deposition of liquids, fat, dust and keep them clean is time-consuming and expensive. Fat pollution is one of the most serious challenges among the manufactures of home appliances and electronics [1]. On the oth [....] » Read More
Title : Engineering novel gold nanoparticles using sageretia thea leaf extract and evaluation of their biological activities
Sumaira, Department of Botany Bacha Khan University Charsadda, Pakistan
An eco-friendly method for biogenic synthesis of gold nanoparticles (AuNPs) was developed using leaf extract of Sageretia thea as a reducing, stabilizing, and capping agent. AuNPs synthesis was immediately confirmed from a color change in the gold solution from yellow to ruby red [....] » Read More
Title : DFT calculation of ZnO iron doped optical and optoelectronic properties using quantum espresso
Hassan Idriss Abaker Idriss, Africa City of Technology ACT, India
Incorporation of Fe ions into the ZnO host matrix, leading to the adjustment of optical band gap and photoluminescence properties. To substantiate our experimental findings, we conducted computational analyses using Quantum espresso, first-principle calculations based on density [....] » Read More
Title : Spilled oil sorption from caspian sea water by modified nano graphenes
Omid Ghasemi, University of Tehran, Iran (Islamic Republic of)
Spilled oil sorption, which was explored from oilfield in Caspian Sea, by Graphene/Chitosan Nano composite (GC Aerogel or GC) and Exfoliated Graphite (EG), was investigated. GC was prepared according to the modified Hummers method and graphite was exfoliated through the reaction [....] » Read More